Design the Main Shaft of Wide Weaving Machine for Equally Sided Reed Advance.

Document Type : Research Studies

Author

Department of Industrial Production Engineering., Faculty of Engineering., El-Mansoura University., El-Mansoura., Egypt.

Abstract

As a result of driving wide weaving machines double warp beam from one side, torsion occurs in the main driving shaft, which in turn affects on the non uniform advance of the reed. during the beat up of the weft yarn. This in turn leads to the increase in the rate of warp yarn tension from the checking side than the picking side., hence the warp yarn in the checking side will be consumed than that in the picking side. 
In the present work the proplem of non-uniform advance of the reed has been solved by reducing the twisting angle of the main driving shaft, through the optimum design of the shaft or by different mechanical devices. Also the selection of the most suitable material and the minimum cost of the driving shaft 

Main Subjects

MEJ- Mansoura Engineering Journal
Volume 17, Issue 3
VOL 17 has Two issues issue 3 consist of two parts from (September to December)
September 1992
Pages 1-13

Files

Share

How to cite

Statistics