MEJ- Mansoura Engineering Journal

Volume & Issue: Volume 35, Issue 1, March 2010

Main Subjects

Architectural Engineering 5

Civil Engineering 5

Computer Engineering and Systems 3

Electrical Engineering 9

Mathematics and Engineering Physics 3

Mechanical Power Engineering 9

Production Engineering and Mechanical Design 1

Textile Engineering 2

Identity as an Approach to Community Sustainability According to Society.

Pages 1-11

Madiha Amasha; Sherief Ahmed Ali Sheta; Ahmed Abdel Rahman Rashed

Towards Sustainable Systems of Architectural Education in Egypt - Comparative Analytical Study of the Academic Programs.

Pages 12-26

Alaa ElAishy; Saad Makram Saad

Rural Sustainable Development According to World Trends and Local Planning.

Pages 27-38

Nanees Abd Elhamied Mohamed Ali Alsayyad; Sherief Ahmed Ali Sheta

Rehabilitation as a Heritage Environment Investment Tool.

Pages 64-71

Asmaa Nasr El-Deen El-Badrawy; Alaa Mohamed El-Eishy

Analysis and Design of Microstrip Filters Using Photonic Band Gap Ground Plane with Fractal Periodic Pattern.

Pages 1-9

Hamada M. Elsaied; Maher Abd Elrazzak

A New Technique for Controlling Hybrid Stepper Motor through Modified PID Controller.

Pages 10-20

Sabry Fouad Saraya; Mohammed Elksasy; Hesham H. Gad

Learning of Artificial Neural Networks by Genetic Algorithms.

Pages 21-33

Jamal Abdul Fatah M. Azzam

Direct Torque Neuro-Fuzzy Control of an Induction Motor.

Pages 34-41

Fayez G. Areed; Amira Haikal; Reham H. Mohammed

Comparative Analysis Methods of Direct Torque Control for Induction Motor.

Pages 43-52

Fayez G. Areed; Amira Haikal; Reham Mohammed

H∞ Robust Controller for a Long VSC-HVDC Link Connected to a Weak Grid.

Pages 53-60

Mohamed Rashed; El-Sayed Mohamed Mohamed Abulanwar; Fathi M. H. Youssef

Acceptable DG Capacity for Radial Distribution System Based on Traditional Protection Scheme.

Pages 61-71

Mahmoud Saber Ahmed Kandil; Mohamed Galal Abd El-Hamid Osman; Magdi Mohamed Ali El-Saadawi; Mohamed Ahmed Mohamed Saeed

Modeling of Variable Speed Wind Turbines with Doubly Fed Induction Generator for Studying Steady State Operation.

Pages 72-81

Magdi Mohamed Ali El-Saadawi; Sahar Sidky Kaddah; Mohamed Galal Abd El-Hamid Osman; S. A. El-Drieny; M. N. Abdel-Wahab

Implementation of Electronic Nose Using Neural Network.

Pages 82-88

B. S. Khairallah; T. A. Hegazy

Applying PSO Technique for Optimum Siting and Sizing of DG in Distribution Systems.

Pages 105-116

I. I. Mansy; A. Abdrabu; M. E. Salem; A. Rasheed

Analysis of Practical Parameters Required for Power Line Carrier (PLC) System Design.

Pages 117-128

El-H. Abd-Rabol; Magdi Mohamed Ali El-Saadawi; A. Hassan; A. Al-Sarraf

Variables of the Built Environment in Light of the Decisions of Economic Openness (An Analytical Study of Urban Change Pattern of the City of Port Said after Announcing a Free City).

Pages 54-63

Amira Ahmed Mohsen Ibrahim; Osama Mohamed Ali Farag; Mohammed Elazab

Study the Effect of High Voltage Power Lines on the Results of Differential Static-GPS Applications.

Pages 1-11

Mahmud El-Mwafi Shetawl; Mohamed Mousa

Effect of Corrosion Inhibitors Admixtures on Corrosion Rate of Steel Reinforcement in Concrete.

Pages 27-43

Mahmoud Imam; Ali H. El- Agamy; Mohamed I. Mahdy; Ahmed I. Abdel-Fattah

Productivity Performance Estimation in Egyptian Construction Projects Based on Regression Analysis.

Pages 44-54

A. M. El-Kholy

Effect of Loading Rates in Free Water Surface Constructed Wetlands for Treating Polluted Water, Case Study: Bahr El-Baqar Drain.

Pages 55-66

Mahmoud Abd El-Shafy Elsheikh; Hazem I. Saleh; Diaa El Quosy; Abdallah A. Mahmoud

Investigating ACI 318-08 Punching Shear Provisions for Design of Isolated Footings.

Pages 67-76

Samir M. Shihada

Fault Detection and Identification of Three Phase Overhead Transmission Lines Ended with Underground Cables.

Pages 129-137

A. Elmitwally; S. Mahmoud; M. Abdel-Rahman

Dynamic Test Specifications for Diagnostic and Control of Parameters in Tribo Systems.

Pages 1-6

Mohammed A. AlNawafleh

The Reduction of Exhaust Emissions from Jordanian Diesel Vehicles.

Pages 18-27

Mohammed Awad Al-Dabbas

Convection Heat Transfer and Pressure Drop for Dilute Polymer Solutions Flow inside Multi-Channels Flat Tube.

Pages 28-44

Hesham M. Mostafa; Tarek F. Oda

Fault Diagnosis in Machining Based on Statistical Process Control.

Pages 45-54

M. El-Baz

Natural Convection Heat Transfer from Discrete Heat Sources Mounted in Rectangular Enclosure Surrounded by a Single-Phase Liquid Coolant.

Pages 55-72

S. A. El-agouz; M. M. Bekheit; A. E. Kabeel

Effect of Air Recirculation on Compressor Performance.

Pages 73-81

Aly El-Zahaby; El-Shenawy Abd-Elhameed; Zakarya Zyada; Khaled Eldin; Mohamed Salem

Influence of Paint Type on Steel Corrosion for Marine Applications.

Pages 82-90

Abdou Abdel-Samad; Yaser Soud; M. Zaki

Numerical study on Natural Convection and Fluid Flow Inside a Tilted Wavy Enclosure.

Pages 91-102

H. Sarban

Database for Optimal Selection of Cutting Conditions, Forces and Power Consumption in Machining Processes.

Pages 103-113

A. M. El Bahloul; I. M. Eleva'; Fatma Elerian; E. Gadelmawla

Solar air conditioning systems.

Pages 7-17

Mohammed Ali Al-Dabbas

Thermal Stability of Poly (2-Acrylamido-4- Antipyrinyl) Thiazole Homopolymer and Copolymer of 2-Acrylamido-4- Antipyrinyl Thiazole with Methyl Methacyylate.

Pages 1-7

A. ELAgamey; M. A. Diab; A. Z. El-Sonbati; H. Abd-ElGhany

Syntheses and Characterization of Anti-Inflammatory Cupper II Complex.

Pages 8-16

Moamen Refat; Mohamed S. El-Garib; A. El-Korashy; Mostafa A. Hussien

Thermal Stability and Degradation of Chitosan Modified by Benzophenone.

Pages 17-25

M. M. El-Halwany; M. A. Diab; A. Z. EI-Sonbati; D. M. D. Bader

Effect of High Concentrations of Alkaline Mediums in Wet Processing on Cellulosic Materials.

Pages 1-12

A. R. Ramadan; A. A. Hebeish; A. M. El-Hossini; I. M. Rakha

Production Planning and Scheduling in Knitted Garment Mill.

Pages 13-20

S. El Gholmy

Journal Archive

Volume 47 (2022)

Volume 46 (2021)

Volume 45 (2020)

Volume 44 (2019)

Volume 43 (2018)

Volume 42 (2017)

Volume 41 (2016)

Volume 40 (2015)

Volume 39 (2014)

Volume 38 (2013)

Volume 37 (2012)

Volume 36 (2011)

Volume 35 (2010)

Volume 34 (2009)

Volume 33 (2008)

Volume 32 (2007)

Volume 31 (2006)

Volume 30 (2005)

Volume 29 (2004)

Volume 28 (2003)

Volume 27 (2002)

Volume 26 (2001)

Volume 25 (2000)

Volume 24 (1999)

Volume 23 (1998)

Volume 22 (1997)

Volume 21 (1996)

Volume 20 (1995)

Volume 19 (1994)

Volume 18 (1993)

Volume 17 (1992)

Volume 16 (1991)

Volume 15 (1990)

Volume 14 (1989)

Volume 13 (1988)

Volume 12 (1987)

Volume 11 (1986)

Volume 10 (1985)

Volume 9 (1984)

Volume 8 (1983)

Volume 7 (1982)

Volume 6 (1981)

Volume 5 (1980)

Volume 4 (1979)

Volume 3 (1978)

Volume 2 (1977)